Skip to content
walkingpadsale

Home › Guides › How to lube a walking pad

How to lube a walking pad

A dry belt drags on the deck, strains the motor and wears out fast. Lubricating takes five minutes.

By Ryan Caldwell. Updated .

Bottom line

Use 100 percent silicone treadmill lubricant, never WD-40 or household oil. Unplug the pad, lift the belt edge, apply the lubricant in a line across the deck under the middle of the belt, then walk slowly for a few minutes to spread it. Most makers suggest lubricating every month or two of regular use, or when the belt feels dry; follow your manual first.

What you need

  • 100 percent silicone treadmill lubricant, usually sold in a bottle with a long applicator tube.
  • The Allen key that came with your pad.
  • A cloth to wipe off any excess.

Step by step

  1. Unplug the pad.
  2. Loosen the belt if needed: turn both rear bolts counterclockwise the same amount.
  3. Apply lubricant in a thin line across the deck under the middle of the belt.
  4. Re-tighten both bolts back the same number of turns.
  5. Walk slowly for a few minutes to spread it.

How often to lube

Follow the manual. As a rule of thumb, every month or two for daily users, or every 50 hours of use. Signs it is time: the belt feels dry underneath, the motor sounds strained or the belt hesitates when you step on.

Belt slipping even after lubing? See how to tighten a walking pad belt.

Questions people ask

Can I use WD-40 on a walking pad?

No. Use 100 percent silicone treadmill lubricant. WD-40 and oils can damage the belt and deck.

What happens if you do not lube a walking pad?

Friction rises, the motor works harder, and the belt and deck wear out faster.

Read next